Omron CX-ONE V1.1 - SETUP MANUAL 11-2005 Setup Manual page 30

Installing the CX-One
2. The setup program will start automatically and the Choose Setup Lan-
guage Dialog Box will be displayed.
The language of the operating system running on the computer will be se-
lected automatically.
If the above dialog box is not displayed, double-click the CD-ROM driver
from the Explorer to display it.
Select the language to be installed and then click the OK Button.
Note Only the CX-Programmer supports languages other than English
and Japanese (including Italian, Spanish, German, French, and
Chinese). If any language other than English or Japanese is select-
ed, the CX-Programmer will be installed in the selected language
and all other software will be installed in English (United States).
When the OK Button is clicked, a splash window for the CX-One will be
displayed, followed by the Setup Wizard.
3. If the CX-Server is already installed on the computer, the following dialog
box will be displayed as a prompt to delete the older version of the CX-
Server.
Click the OK Button and uninstall the CX-Server. If the Cancel Button is
clicked, CX-One installation will be exited.
If an earlier version of any of the Support Software is already installed in
the computer, one of the following dialog boxes will be displayed.
Section 2-1
13