Advertisement
Quick Links
SUMAKE
Specification:
Free Speed
Horse Power
Air Consumption
Overall Length
Air Inlet (PT)
Air Hose (I.D.)
Air Pressure
Net Weight
SUMAKE INDUSTRIAL CO., LTD
4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91
Pneumatic Door Skinner Tool
2,400 r/min
3/8"
5CFM (140 L/min)
8-2/9" (209mm)
1/4" (6.35 mm)
3/8" (10 mm)
90 psi (6.3 bar)
3.1 lbs (1.36 kg)
PNEUMATIC TOOLS
ST-DS100
Noise and Vibration:
Vibration
EN ISO 28927-12
No Load:
2.05 m/s²
Uncertainty
K= 0.65 m/s
Noise
EN ISO 15744
Sound Pressure Level
load: 89.1 dB(A)
Sound power level
load: 100.1 dB(A)
Uncertainty
K= 3dB
²
ST-DS100-S-2405A-LWF
Remark
Please always
wear ear
protector at
environment
noise level > 80
dB(A) due to
risk of impaired
hearing!
Advertisement
Related Manuals for Sumake ST-DS100
Summary of Contents for Sumake ST-DS100
- Page 1 Air Hose (I.D.) 3/8” (10 mm) risk of impaired Uncertainty Uncertainty Air Pressure 90 psi (6.3 bar) hearing! K= 0.65 m/s K= 3dB ² Net Weight 3.1 lbs (1.36 kg) SUMAKE INDUSTRIAL CO., LTD 4F,NO.351,Yangguang St.,Neihu District TAIPEI, TAIWAN, ZIP:114-91 ST-DS100-S-2405A-LWF...
-
Page 2: Ec Declaration Of Conformity
DECLARATION OF CONFORMITY SUMAKE INDUSTRIAL CO., LTD. 4F, No. 351, Yangguang St., Neihu District, Taipei City, Taiwan declare in sole responsibility that the equipment Equipment： PNEUMATIC DOOR SKINNER TOOL Model/ Serial No.： ST-DS100 to which this declaration applies, complies with these normative documents: ... - Page 3 Use a 3 HP or larger compressor for each stops running released. contact with electric power source. Sumake is a manufacturer and exporter of air sander. 2. It is forbidden to use this tool in explosive tools since established. We have devote all our...
- Page 4 ST-DS100 PNEUMATIC DOOR SKINNER TOOL PARTS LIST Parts No. Description Q'ty Parts No. Description Q'ty DS100-01 Motor Housing DS100-26 Spacer DS100-02 Lever DS100-27 Retainer Ring DS100-03 DS100-28 Needle DS100-04A Air Inlet (PT19) DS100-29 Needle Plate DS100-04B Air Inlet (NPT18) DS100-30...
- Page 5 DIE GRINDER Original instructions SUMAKE Industrial Co. Ltd.
- Page 6 Possible direct or indirect consequential damages are not the responsibility of SUMAKE Industrial co., Ltd. General safety rules: Watch the tool at all times when in use.
- Page 7 to protect hands. 2. Operators and maintenance personnel must be physically able to handle the bulk, weight and power of the tool. 3. Hold the tool correctly: be ready to counteract normal or sudden movements – have both hands available. 4.
-
Page 8: Specific Safety Instructions
3. Never direct air at yourself or anyone else. 4. Whipping hoses can cause severe injury. Always check for damaged or loose hoses and fittings. 5. Whenever universal twist couplings (claw couplings) are used, lock pins shall be installed and whipcheck safety cables shall be used to safeguard against possible hose-to-tool and hose-and-hose connection failure.
Need help?
Do you have a question about the ST-DS100 and is the answer not in the manual?
Questions and answers