Parkside PSBM 500 A1 - MANUAL 7 Manual page 9

make sure that your footing is secure.
½
If the inserted tool jams, switch off the
electrical power tool immediately.
½
Always keep the device clean, dry
and free of oil or grease.
½
Only handle the electrical tool by means
of the insulated handling surfaces when
you are carrying out jobs where the
insertion tool may come into contact
with hidden power supply lines or its
own power cable.
½
Keep your workplace clean and tidy.
½
Wait until the electrical tool has come
to a standstill before putting it down.
©
Caution utility services!
DANGER! Ensure that you do not strike
electrical cables, gas or water pipes when
you are working with the electrical power
tool.
©
Original accessories /
attachments
Use only the accessories and attachments
detailed in the operating instructions.
© Before first use
WARNING! DANGER OF INJURY!
© Attaching the auxiliary handle
NOTE:
© Using the depth stop
©
Inserting tools
Quick-action drill chuck:
Assembly tools for screws and nuts: