Disposal; Declaration Of Conformity / Manufacturer - Parkside PFSP 100 - MANUEL 4 Manual

Warranty / Disposal / Declaration of Conformity / Manufacturer
If this product has been subjected to improper or in-
appropriate handling, abuse, or interventions not
carried out by one of our authorised sales and
service outlets, the warranty will be considered void.
This warranty does not affect your statutory rights.
GB
DeS UK LtD
tel.: 0871 5000 700 (£ 0,10 / minute)
e-mail: support.uk@kompernass.com

Disposal

Q
The packaging is wholly composed of
environmentally-friendly materials that can
be disposed of at a local recycling centre.
Do not dispose of electrical
power tools with the household
rubbish!
In accordance with European Directive
2002 / 96 / EC (covering waste electrical and elec-
tronic equipment) and its transposition into national
legislation, worn out electrical power tools must be
collected separately and taken for environmentally
compatible recycling.
Contact your local refuse disposal authority for
more details of how to dispose of your worn out
electrical devices.
environmental compatibility and
disposal of materials:
j
Paint, varnishes etc. are special wastes which
must be disposed of in the appropriate manner.
j
Observe the regulations applicable in your area.
j
Observe the manufacturer's instructions.
j
Environmentally damaging chemicals must not
be allowed to enter the soil, groundwater or
watercourses.
j
Carrying out spraying at the edge of water-
courses or adjoining areas (catchments) is
therefore prohibited.
22 GB/MT
j
Consider their environmental compatibility
when buying paints, varnishes etc.
Declaration of Conformity /
Q
Manufacturer
We, Kompernaß GmbH, Burgstr. 21,
D-44867 Bochum, Germany, declare that this
product complies with the following EU directives:
Machinery Directive
(98 / 37 / eC)
eU Low voltage Directive
(2006 / 95 / eC)
electromagnetic Compatibility
(2004 / 108 / eC)
type / Machine designation:
Paint spray gun
Bochum, 31.10.2009
Hans Kompernaß
- Managing Director -
We reserve the right to make technical modifications
in the course of product development.