Advertisement
Quick Links
Quick Start
Juniper Mist Edge
IN THIS GUIDE
Step 1: Begin | 1
Step 2: Up and Running | 5
Step 3: Keep Going | 8
Step 1: Begin
IN THIS SECTION
Onboard a Mist Edge Using the Mist AI Mobile App | 2
Onboard One or More Mist Edges Using a Web Browser | 3
This guide walks you through the simple steps to get a new Juniper Mist Edge up and running in the Mist cloud. You can
onboard a Mist Edge using your mobile phone, or you can onboard one or more Mist Edges using your computer.
NOTE: Before you begin, you must set up your organization and sites, and activate your subscriptions. For more
information, see
Quick Start:
We show you how to onboard Mist Edge using two different methods:
• To onboard one or more Mist Edge using your mobile phone, see
App" on page 2
Mist.
"Onboard a Mist Edge Using the Mist AI Mobile
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Juniper Mist Edge
Summary of Contents for Juniper Mist Edge
- Page 1 Onboard One or More Mist Edges Using a Web Browser | 3 This guide walks you through the simple steps to get a new Juniper Mist Edge up and running in the Mist cloud. You can onboard a Mist Edge using your mobile phone, or you can onboard one or more Mist Edges using your computer.
- Page 2 Onboard a Mist Edge Using the Mist AI Mobile App You can use the Mist AI mobile app to quickly onboard a Mist Edge. With this app you can claim a Mist Edge, assign the device to a site, or add the device to a cluster. To onboard a single Mist Edge using the Mist AI mobile app from your mobile phone: 1.
- Page 3 PO information. Make a note of this code to use in Step 3 in the following procedure. Onboarding a single Mist Edge—Locate the QR code on your Mist Edge device and jot down the alphanumeric claim code directly above it.
- Page 4 4. (Optional) Select the Assign claimed ME to site checkbox to assign the claimed Mist Edge device to a site. You can select a site from the drop-down. 5. Click Claim. 6. Review the information and close the window. 7. View your new Mist Edge on the Inventory page. The status should show Disconnected with a red dot and Registered.
-
Page 5: Step 2: Up And Running
The steps are explained in detail in the following sections. Mount the Mist Edge You can mount the Mist Edge on a server rack. For instructions specific to your Mist Edge model, see the applicable hardware guide on the Juniper Mist Supported Hardware page. - Page 6 1. Connect an Ethernet port from a switch to the OOBM interface of the Mist Edge device port (labeled as MIST). This interface allows the Mist Edge device to connect to Internet and to Juniper Mist cloud for configuration, telemetry, and life cycle management.
- Page 7 You can choose any of the following methods to access the console: • Log in to Mist Edge CLI using the keyboard, monitor, and mouse and access the console. • Configure Integrated Dell Remote Access Controller (iDRAC) port on the Mist Edge device.
-
Page 8: What's Next
Mist Edge along with the services updates. Once the OOBM is configured and the firewall rules are set, the Mist Edge appears as Connected with an amber dot and Registered in the Mist Edge inventory. -
Page 9: General Information
Juniper Learning Portal. Juniper Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in the United States and other countries. All other trademarks, service marks, registered marks, or registered service marks are the property of their respective owners.
Need help?
Do you have a question about the Mist Edge and is the answer not in the manual?
Questions and answers