Operation Instructions - Midea MAP05S1AWT User Manual

OPERATION INSTRUCTIONS

Electronic control operating instructions
1. POWER button
Wireless operation(on some models)
Used to initiate the wireless connection mode.
For the first time using the wireless function,
press the POWER button for 3 seconds to
initiate the wireless connection mode . The LED
DISPLAY shows 'AP' to indicate you can set
wireless connection. If connection(router) is
successful within 8 minutes, the unit will exit
wireless connection mode automatically and
the wireless indicator illuminates. If connection
fails within 8 minutes, the unit exits wireless
connection mode automatically. After Wireless
connection is successful, for some models you
can press MODE and UP (+) buttons at the
function and the LED DISPLAY shows 'OF' for
3 seconds, press MODE button and UP(+) to
turn on Wireless function and the LED DISPLAY
shows 'On' for 3 seconds.
NOTE:
When you restart the wireless
function, it may take a period of time
to connect to the network
automatically.
2. FAN button
Press to control the fan speed in four steps
AUTO,HIGH, LOW, and CONT. The fan speed
settings.
Continuous Fan function
In COOL or DRY mode, press the Fan button
fan function. When the function is turned on,
the Cont. fan light will illuminate, indicating the
fan will run continuously. When the function is
indicating that the fan will stop when the
compressor stops.
4. UP and DOWN
3. MODE
3. MODE button
Selects the appropriate operating mode. Each
time you press the button, the mode is selected
in a sequence that goes from AUTO, DRY, COOL
and FAN, The mode indicator light illuminates
NOTE:
In AUTO mode, the FAN
speed will be adjusted automatically.
AUTO mode
Press the "MODE" button until the "Auto"
indicator light comes on. In this mode, the
fan speed or the temperature will be adjusted
automatically.
COOL mode
Press the "MODE" button until the "COOL"
indicator light comes on.
Press the UP and DOWN buttons " " or " "
to select your desired room temperature.
DRY mode
Press the "MODE" button until the "Dry"
indicator light comes on. In this mode, the
fan speed or the temperature cannot be
adjusted. The fan motor operates at Auto
speed.
NOTE:Keep windows and doors
closed for the best dehumidifying
17
1. POWER
5. Display
2. FAN