Technical Information; Specific Safety Advice - Parkside PAHKS 18V Operating And Safety Instructions Manual

CORDLESS CIRCULAR SAW PAHKS 18 V
Please read carefully through the following information concerning safety and proper use. Before
reading, fold out the page with the illustrations and make yourself familiar with all the functions
of the equipment. Please read the operating instructions
advice carefully. Use the equipment only as described and for the indicated purposes.
By doing this you will be able to work in complete safety and produce better results.
Be careful to keep these advice notes and if necessary pass them on to a third party.
FEATURES OF THE PAHKS 18 V
Battery pack
Guide plate
Riving knife
Outer flange
Screw
Blade cover
Saw blade
On/off switch

TECHNICAL INFORMATION

Nom. speed, no load:
Nominal voltage:
Blade diameter:
Blade gap:
Blade thickness:
Blade tooth thickness max.: 1.5 mm
Cutting depth 45°:
Cutting depth 90°:
Sound pressure level:
Sound power level:
Vibration:
Weight:

SPECIFIC SAFETY ADVICE

In addition, you must also read the advice in the accompanying booklet called "Safety advice"
before using the equipment for the first time.
The cordless circular saw PAHKS 18 V is to be used exclusively for cutting wood and plastic.
Before carrying out any work on the saw, e.g. setting the guide plate etc., always remove
the battery pack .
Never remove sawdust or splinters whilst the saw is running – always switch off the saw and
remove the battery pack
For sawing timber and plastic
Switch lock
Second hand grip
Parallel guide
Attachment screw for parallel guide
Angle adjuster
Sawdust removal
Rotation direction arrow
Depth adjuster
n 0
3000 rpm
18 V
140 mm
10 mm
1 mm
28 mm
40 mm
80.4 dB (A)
93.4 dB (A)
0.3 m/s 2 (vibration)
4.1 kg
first.
below and the accompanying safety
Quick charger:
Charging current:
Charging duration: 50-60 minutes
Battery pack:
Nominal voltage:
Battery capacity:
Capacity:
4
1200 mA
18 V
1700 mAh
30.6 Wh
(no-load speed operation)