Table of Contents
Advertisement
Service
J
Arrange for your appliance to be repaired only
by qualified specialists and only with original
spare parts. It can thus be ensured that the
safety of the appliance is assured.
J
Always arrange for the exchange of the plug or
the power cable to be carried out by the manu-
facturer of the appliance or by his approved
customer services. It can thus be ensured that
the safety of the appliance is assured.
Original ancillaries / accessories
J
Use only the ancillaries and accessories that
are detailed in the operating instructions.
The use of parts other than those recommended
in the operating instructions, or other accessories,
can put you at risk of injury.
Understood everything?
J
When you have become familiar with these gen-
eral safety instruction for electrical appliances,
and, with the help of the appropriate operating
instructions, know all about the functions and
handling of your electrical appliance, then you
can start working with it.
You will work at your safest only with careful
attention to all of the declarations and instruc-
tions of the manufacturer.
Commissioning
Charging the battery pack
Note: A new battery pack, or one that has not been
in use for an extended period, must be charged up
before the first / renewed usage.
The battery pack attains its full capacity after ca. 3-5
charging cycles.
Safety Notices / Commissioning / Operation
Note: Always unplug the appliance before you
remove / insert the rechargeable battery pack
from / into the charger.
1. Place the battery pack
charger
(see Fig. A).
I
2. Insert the plug into the power socket. The now
glowing red charging control LED
the start of the charging process. The red charg-
ing control LED
P
battery pack is fully charged.
3. The green charging control LED
that the charging process is complete and the
battery pack
is ready for use.
Q
j
Never recharge a battery pack for a second time
immediately after a charging process. There is
a risk of overcharging the rechargeable battery
pack and, as a result, reducing the life span of
the rechargeable battery and the charger.
j
Switch the battery charger off for at least
15 minutes between two consecutive battery
charging processes. To do this, remove the
power plug.
Inserting / removing the battery pack
into / from the appliance
Inserting the battery pack:
j
Insert the battery pack
until it engages.
Removing the battery pack:
j
Slide the battery release button
and pull the battery pack
Operation
Placing the bonnet on the buffing plate:
1. Turn the appliance so that the buffing plate
is facing upwards.
2. Place the bonnet over the buffing plate
Ensure that the bonnet is placed centrally and
taughtly onto the buffing plate.
into the battery
Q
indicates
P
extinguishes as soon as the
indicates
O
into the appliance
Q
to the front
W
upwards.
Q
.
R
GB/IE
R
9
Advertisement
Table of Contents
