Selecting The Frequencies To Be Stored In The Channel Bank "U - Sennheiser SR 3254 Instructions For Use Manual

TUNE Selecting the frequencies to be stored in the
channel bank "U"
Via the "TUNE" menu, you can freely select the frequencies to
be stored in the channel bank "U" (user bank).
Press the
dot "TUNE"
Press the
"TUNE" menu.
The LC dot "TUNE"
start flashing.
Note
When pressing the
the /
can then change the frequency.
When you have selected the channel bank "F" and then select
the "TUNE" menu, the transmitter automatically switches to
channel 01 of the channel bank "U" and "U.01" appears on the
display. Otherwise, the current channel of the channel bank "U"
is displayed.
Press the
frequency. Transmission frequencies are tunable in 5-kHz
steps within a switching bandwidth of 36 MHz max.
Press the
appears on the display. While the transmitter changes to the
new frequency, it is muted.
/ buttons to select the "TUNE" menu. The LC
lights up.
SET button to get into the setting mode of the
and the
SET button for one second, you can use
buttons to select a different channel for which you
/ buttons to select the desired transmission
SET button to store your selection. "Sto." briefly
"FREQUENCY MHZ" display
21