Connecting the microphone cable/instrument cable
The audio input is designed for the connection of both condenser micro-
phones and instruments (e.g. guitars). DC powering of the condenser
microphones is via the audio input
socket).
Use one of the recommended Sennheiser microphones or the CI 1-4
instrument cable (see "Accessories" on page 33).
Connect the 3-pin special audio connector
microphone or instrument cable to the socket
Lock the 3-pin special audio connector by screwing down the coupling
ring
.
Via the operating menu, adjust the sensitivity of the microphone/line
input (see page 20).
Putting the bodypack transmitter into operation
MIC/LINE
(3-pole special audio
from the Sennheiser
MIC/LINE
.
9