Sennheiser SK 2000 Instruction Manual page 22

Input sensitivity
is adjusted...
... too high
... correctly
... too low
The following figures are a guide to the best settings:
Transmission situation
Loud music/vocals
Presentations
Instrument input
Electric guitars with single coil pickups
Electric guitars with humbucker pickups
Guitars with active electronics (active pickups,
active EQs, piezo pickups)
Selecting the frequency bank and the channel manually –
"Frequency Preset"
Menu
Frequency Preset
B.Ch: 5.14
Call up "Frequency
Preset"
When you are in the
is deactivated.
Adjusting settings via the operating menu
Effect/display
Close talking distances, speakers with loud voices or
loud music passages cause overmodulation in the
transmission link.
The yellow AF PEAK
The audio level display "AF"
for the duration of the overmodulation.
The audio level display "AF"
only during the loudest passages.
The transmission link is undermodulated. This results
in a signal with high background noise.
Frequency Preset
B.Ch: 5.14
792.525MHz
Select the frequency
bank and confirm
"Stored"
"Frequency
LED lights up.
shows full deflection
shows full deflection
Sensitivity setting
−30 to −21 dB
−21 to 0 dB
−30 to −24 dB
−45 to −30 dB
−45 to −30 dB
Frequency Preset
B.Ch:
Select the channel;
store the setting
Preset" menu item, the RF signal
1.14
818.850MHz
21