HP StorageWorks DAT Series Troubleshooting Manual page 3

Action recommended
Compare driver properties like version
and file size with the correct downloaded
version from the hp.com Web site.
Back to Start of Section
Back to Top
If NT4 - check SCSI connectivity
Action recommended
Check Control Panel, then
SCSI Adapters.
Select the correct SCSI adapter
and check that the tape device
can be seen.
Back to Start of Section
Back to Top
If NT4 - check tape device detected by operating system
Action recommended
Check the tape devices icon in the
Control Panel, to display the tape
drive model or type.
(Select Detect to rescan the bus
for attached tape devices).
Back to Start of Section
Back to Top
If NT4 - check if native driver is loaded
Action recommended
Check the Drivers tab to see if a native
driver is listed. If a driver is loaded here
then be aware that this will not suffice
for ISV backup software such as
ARCserve and Backup Exec. Check the
properties of the driver to confirm.
Check Control Panel, Devices to check
if a device driver is loaded.
Additional information
considerations in Windows NT4 and
2000 operating
Click here for information on drivers
and operating systems.
Additional information
Click here for information on tape drive
detection and other considerations in
Windows NT4 and 2000 operating
Click here for information on tape drive
detection and other considerations in
Windows NT4 and 2000 operating
Additional information
Click here for information on tape drive
detection and other considerations in
Windows NT4 and 2000 operating
systems.
Additional information
Click here for information on tape
drive detection and other
considerations in Windows NT4 and
2000 operating systems.
Click here for information on tape
drive detection and other
considerations in Windows NT4 and
systems.
systems.
systems.