Connecting Headphones Or The Induction Loop For Hearing Aids To The Receiver - Sennheiser SET 830 S Instruction Manual

Connecting headphones or the induction loop for
hearing aids to the receiver
7
The socket
• the supplied induction loop
• headphones or
• a connection cable to your hearing aid.
Connecting the induction loop
Carefully remove the clip
Attach the clip of the induction loop as shown.
Connect the induction loop
receiver.
Set your hearing aid to position "T".
If your hearing aid has no position "T", please contact your
hearing aid acoustician.
Note:
For alternative connection possibilities to your hearing
aid as well as the connection to cochlea implants, please
contact your hearing aid acoustician.
of the receiver allows you to connect
O
7
Putting the Set 830 S into operation
Q
,
from the receiver.
Q
to the socket
Q
7
of the
11