Care And Maintenance - Sennheiser HMEC 46-1 Instructions For Use Manual

Care and maintenance

Cleaning the headset
Use a soft, slightly damp cloth to clean the headset from
time to time. If the headset is very dirty, use a cloth
dampened with mild, soapy water.
Danger of short-circuit due to the ingress of
CAUTION!
water!
Water entering the housing of the headset
can cause a short-circuit and damage the
electronics.
Use only a slightly damp cloth to clean the
headset. Do not use any solvents or cleansing
agents.
Replacing the ear pads
For reasons of hygiene, the ear pads should be replaced
from time to time. Grasp the edge of the foam ear pad
behind the ear cup as shown and peel it up and away from
the ear cup. Slide the new ear pad onto the earcup. Repeat
for the other ear cup.
15