USA Lab UHC Series User Manual page 12

UHC Series - User Manual
WARNING
Risk of serious injury or damage!
Follow all federal, state, municipal laws, codes, and ordinances when installing and
operating the chiller.
WARNING
Risk of electrical shock!
Make sure the input voltage matches the specifications of the equipment.
Use the correct voltage, connection, and ensure proper grounding.
Do not unplug the chiller while it is in operation.
Do not use a generator to power the chiller.
Do not alter or change the length of the power cable.
WARNING
Risk of serious injury or damage!
Do not operate the fluid pump with your valve in the off position. The equipment
will overheat the pump and lead to failure.
Do not run the liquid pump dry and allow plenty of time to prime the pump.
Do not allow the compressor to cycle more than 5 times per day.
The compressor has a 10 minute cool-down period before it can be run again.
Fluid lines must not have any hard bends which can prevent clear flow of fluids.
WARNING
Risk of serious injury or damage!
Do not use flammable, corrosive, or explosive substances on or near the
equipment.
Only install the chiller in a climate-controlled environment.
Not to be serviced by users!
All repairs must be done following advice and information from USA Lab or one of
their representatives.
Any repairs must only be done by qualified electricians.
Contact USA Lab for details if your equipment needs repair.
12 of 44
1 Safety information
1003 - 1