Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for USA Lab 500MLMANTLE
Summary of Contents for USA Lab 500MLMANTLE
- Page 1 HMSC / MANTLE Manual Models: 500MLMANTLE, 1LMANTLE, 2LMANTLE, 5LMANTLE...
- Page 2 Safety Precautions and Explanations At USA Lab, safety is our number one priority. The following information provides guidelines for safety when using USA Lab equipment. Any piece of machinery can become dangerous to personnel when improperly operated or poorly maintained.
- Page 3 Ensure that all power sources are turned off when the machine is not in use. This encompasses electrical and pneumatic power. • Read the manual for any special operational instructions for each piece of equipment. All USA Lab authored manuals are typically included with each device as well as posted online. •...
-
Page 4: Symbols And Warnings
Symbols and Warnings Below are examples of commonly used symbols and what they mean. Understand them and their potential consequences. - Page 5 Index Safety Precautions and Explanations 1. Important Information 1.1 Safety Notices 1.2 Technical Parameters 2. Control Panel Operation 2.1 LED Display Operation 3. Installation 3.1 Electrical Connection 3.2 Operating Area 3.3 Operating Instructions and Notes 4. Warranty Information and Coverages 4.1 Warranty 4.2 Return Policy 4.3 Notes...
-
Page 6: Section 1 | Important Information
Apply a rag to wipe the parts clean after washing away stains; do not use hard objects / abrasives. Do not use flammable, corrosive, or explosive substances on, in or near the equipment. If there is a problem, do not continue to use the heater. Call us immediately. 1.2 Technical Parameters Model 500MLMANTLE 1LMANTLE 2LMANTLE 5LMANTLE Power... -
Page 7: Section 2 | Control Panel Operation
Section 2 | Control Panel Operation 2.1 LED Display Operation On the front panel, there are 3 buttons. The three buttons are as follows: S = Set / Enter ▲ = Increase ▼ = Decrease Do not HOLD the S button, simply press it quickly. How to set a temperature: Press the set button Increase the value on the display to the desired set point... -
Page 8: Operating Area
3.2 Operating Area Ensure the work area is clean and free from debris. Always keep adequate space around the mantle to prevent combustible objects from touching the hot mantle. The mantle produces a lot of heat over time. Make sure the mantle is used under a fume hood or other non-combustible enclosure. - Page 9 NOTES: 5LMANTLE is 220-240V ONLY. A NEMA 6-20 cord will be supplied. The probe must be plugged in and submerged in the solution to operate the mantle. Ensure that the mantle has a reliable ground connection. Do NOT use only heating, always use the stirrer when heating. This helps keep the motor cool as well as keep the temperature accurate.
-
Page 10: Section 4 | Warranty Information And Coverages
Within this warranty period USA Lab will replace or repair components that fail during normal daily use. Such repairs or parts will be covered in full by USA Lab and the customer will be responsible for shipping, labor, and custom duties. - Page 11 30 days. exceptions. You will be responsible for the return shipment unless deemed defective by USA Lab. In that case, we will pay for return shipment and replacement shipment costs. • The item(s) must be returned in original packaging and in undamaged condition.
- Page 12 This manual and its contents are subject to change without notice. USA Lab reserves the right of ultimate interpretation of the instruction manual. Additionally, USA Lab is not responsible for damages or injuries caused by improper use; knowingly or unknowingly.