Page 2
Safety Precautions and Explanations At USA Lab, safety is our number one priority. The following information provides guidelines for safety when using USA Lab equipment. Any piece of machinery can become dangerous to personnel when improperly operated or poorly maintained.
Page 3
• Read the manual for any special operational instructions for each piece of equipment. All USA Lab authored manuals are typically included with each device as well as posted online. • Know how the equipment functions and understand the operating and halting processes.
Stand Assembly 1. Install the vertical pole into the top of the mantle on the rear half. (left or right side) 2. Open and adjust the blue boss clamp. Attach loosely. 3. Attach finger clamp to the horizontal side of the blue boss clamp. 4.
Auto-tune / Auto-calibration Only perform this tuning at the desired running temperature, stirrer speed, fluid type, and fluid volume. Hold Shift (D) for 8-10 seconds to enter the Auto-tune menu. Change the value to “0001” and then press Set (C). An “AT” symbol will flash on the screen while Auto-tune is running. The indicator will disappear when it has been completed.