Download Print this page

Advertisement

Quick Links

Rotary Evaporator Manual
Model: RE-200AA
2L Rotary Evaporator Automatic Lift

Advertisement

loading
Need help?

Need help?

Do you have a question about the RE-200AA and is the answer not in the manual?

Questions and answers

Summary of Contents for USA Lab RE-200AA

  • Page 1 Rotary Evaporator Manual Model: RE-200AA 2L Rotary Evaporator Automatic Lift...
  • Page 2 7.2 Storage 8. Maintenance 9. After-sales service At USA Lab, safety is our number one priority. The following information provides guidelines for safety when using USA Lab equipment. Any piece of machinery can become dangerous to personnel when improperly operated or poorly maintained.
  • Page 3 • Read the manual for any special operational instructions for each piece of equipment. All USA Lab authored manuals are typically included with each device as well as posted online at: https://www.usalab.com/resources • Know how the equipment functions and understand the operating processes.
  • Page 4 1.2 Purposes and features RE-200AA rotary evaporators are mainly used in the small-scale test and production of biological, pharmaceutical, chemical, food and other extractions. With 2L capacity and large-diameter rotary evaporating flasks. When it is placed in a water bath, it allows the solution to spread and evaporate rapidly.
  • Page 5 2 Diagram...
  • Page 6 3 Control Panel Operation Temperature: To set the temperature of the bath. Press the SET button and then use the UP or Down arrows until the Set Value is reached. You can use the left arrow for large changes. Press SET again to finalize the changes.
  • Page 7 4 Preparing for Installation 1. Please refer to the packing list above to check whether the components and parts are included. If there are any missing parts, please contact us immediately. 2. Remove any residue on the glass parts before assembly and keep the glass flange surfaces clean; apply vacuum grease to both sides of the seal ring gaskets, ground joints and PTFE gaskets before the installation.
  • Page 8 6 Water and vacuum tubing connections 7 Operation 7.1 Operating method Set your chiller for the rated lowest temperature. Always run the loop. Allow the chiller to cool the entire loop until it is close to the set temperature. Raise the bath until the water covers half of the outside of the flask. Turn on the bath heating and set between 50C –...
  • Page 9 • By default, a 15% restocking fee is applied on all items that are in original packaging and unused with no damage. This applies to all items returned within 30 days. No exceptions. You will be responsible for the return shipment unless deemed defective by USA Lab. In that case, we will pay for return shipment and replacement shipment costs.