Reset Procedure - Dataton WATCHPAX 30 User Manual

RESET PROCEDURE

the reset menu is hidden by design in order to avoid accidental resets or misuse. to reset your
WatCHpaX 30 device, follow these steps:
1. power off the WatCHpaX 30.
2. disconnect any UsB devices.
3. now connect a keyboard to one of the UsB ports.
4. Connect at least one display device to an HdMI output.
5. power on the WatCHpaX 30.
6. during startup, you will see a five-second countdown in the top left corner of the display. press esc
during this countdown.
5
note: If you don't see a counter, it means the display device is slow to lock to the output. In that case,
press esc repeatedly after power-on to move to the menu below.
7. select the desired reset option in the menu that appears, and press enter.
IMportant: there will be no confirmation – the reset process starts immediately!
8. as noted above, the reset process starts immediately, providing some visual feedback.
InstallatIon and operatIon 13