Reset To Factory Settings; Reset Procedure - Dataton WATCHPAX 60 User Manual

• Capture settings
- edId
- Color domain, etc.

RESET TO FACTORY SETTINGS

this resets all partitions to factory settings and all user data will be lost. this level of reset is suitable
when you want to remove all settings between projects.

RESET PROCEDURE

the reset menu is hidden by design in order to avoid accidental resets or misuse. to reset your
WatCHpaX 60 device, follow these 10 steps:
1. power off the WatCHpaX 60.
2. disconnect all UsB devices.
3. Insert a keyboard into one of the two UsB ports.
4. Connect at least one display device to a displayport output.
5. power on the WatCHpaX 60.
6. during startup, you will see a five-second countdown in the top left corner of the display. press esc
during this countdown.
note: If you don't see a counter, it means the display devices are slow to lock to the output using
displayport. In this case, press "esc" five seconds after the startup beep.
7. select the desired reset option in the menu that appears, and press enter.
8. IMportant: there will be no confirmation: the reset process starts immediately, providing some
visual feedback.
InstallatIon and operatIon 11