Switching Between Watchout Versions; From Watchout 7 To Watchout 6; From Watchout 6 To Watchout 7 - Dataton WATCHPAX 30 User Manual

SWITCHING BETWEEN WATCHOUT VERSIONS

By default, WATCHPAX 30 starts in version 7 mode but you can switch to version 6, and vice
versa.

FROM WATCHOUT 7 TO WATCHOUT 6

You can switch from WATCHOUT version 7 to version 6 using the Producer interface in
WATCHOUT version 7.
• Connect your WATCHPAX 30 unit and open the WATCHOUT 7 Producer
• Go to the Devices window
• From the list of devices, choose your WATCHPAX
• The Device Properties window will open automatically
• Scroll down in the Device Properties window and choose "Switch to WATCHOUT 6"
• Press OK in the pop-up window to confirm
This will cause WATCHPAX to reboot and it then starts in WATCHOUT 6.

FROM WATCHOUT 6 TO WATCHOUT 7

There are two ways to switch from version 6 on your WATCHPAX 30 to version 7: from the
WATCHOUT 6 production computer or locally from the WATCHPAX media server.
From WATCHOUT 6 production computer:
• Choose one of the displays from WATCHPAX media server
• On the Stage menu, choose "Manage Display Computer" then "Remote Access"
• On the File menu, choose "Restart in WATCHOUT 7"
Locally from the WATCHPAX media server:
INTRODUCTION 5