Download Print this page

Flycam FLCM-FLN-MSTR-01 Assembly Manual

Download this manual

What's In The Box

Please inspect the contents of your shipped package to ensure you have received everything that

is listed below.

Support Bar

Side Support

Adjustment

Accessory Bag

No part of this document may be reproduced, stored in a retrieval system, or transmitted by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permitted by the applicable copyright

Flowline Master with Pro Vest

A s s e m b l y M a n u a l

Balance Adjustment Knob

statutes or in writing by the Publisher.

(FLCM-FLN-MSTR-01)

Camera Hook

Release

Lever

Bag Packing

Page 1 Flowline Master with Pro Vest (FLCM-FLN-MSTR-01) A s s e m b l y M a n u a l What’s In The Box Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Page 2 Flowline Master Setup  Join section-1 of support bar to section-2 with simple push-fit technique. Section-2 Section-1  Remove the side knobs and join section-2 with section-3 and again tighten the side knobs. Section-3 Side knob of Section-2  Wear Support Jacket and tighten the buckles provided at chest and waist.
Page 3 CAUTION: Do Not release the Lever without removing the setup. It may result in serious damage to the camera. YOUR FLYCAM FLOWLINE MASTER BODY SUPPORT RIG ALL DRESSED UP AND READY TO GO (SHOWN WITH OPTIONAL ACCESSORIES) Warranty: We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts.