Making The Connections - THOMSON VTH6050F User Manual

Set-up
M
aking the connections
J
Connecting the video recorder and television set with this
cable simplifies set-up and subsequent use, and considerably
improves the picture and sound reproduction quality. If your
television set has no SCART socket, you'll have to adjust the
modulator of the video recorder and assign a channel
number to the video recorder on the television set (refer to
page 6).
1 Disconnect the aerial cable from your TV set and reconnect it to the IN socket of your
video recorder.
2 By means of the coaxial cable supplied, connect the video recorder's OUT socket to the
television's aerial socket g
3 With the SCART cable supplied, connect the video recorder's AV 1 socket
(audio/video 1) to the television's SCART socket (AV 1, EXT 1, AUX 1
depending on the make).
4 Connect the video recorder to the mains with the power cord supplied by first plugging
in the connector at the video recorder rear.
AV1
4
220V/240V - 50Hz
J
Other possible connection schemes are shown on page 7 and 9
g .
1
IN
OUT
2
3
GB
GB
AV1
EXT1
AUX1
3