THOMSON VPH7090 - annexe 1 User Manual
  1. Manuals
  2. Brands
  3. THOMSON Manuals
  4. VCR
  5. VPH7090- - SETUP
  6. User manual

THOMSON VPH7090 - annexe 1 User Manual

Hide thumbs Also See for VPH7090 - annexe 1:
Table of Contents

Advertisement

Quick Links

See also: Setup Manual
SAFETY INFORMATION
This video is suitable for use on A.C. mains supply, 220-240 V - 50 Hz only.
It must not be connected to D.C. mains.
Note: The mains lead of the video is fitted with a moulded plug.
Because the lead is detachable and because it contains safety
components we cannot recommend re-wiring.
Do NOT under any circumstances plug the severed plug into any
mains socket as this could result in electric shock.
A fused plug must be fitted with a 3A fuse approved by ASTA or
BSI to BS 1362 and fuse covers must always be securely replaced.
If your Video Recorder does not work, the fuse may be blown.
!
The OFF button B on the remote control does not completely disconnect
the unit from the mains supply but switches operating power on and off.
Mains connection
EN
I

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VPH7090 - annexe 1 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for THOMSON VPH7090 - annexe 1

Summary of Contents for THOMSON VPH7090 - annexe 1

  • Page 1 SAFETY INFORMATION Mains connection This video is suitable for use on A.C. mains supply, 220-240 V - 50 Hz only. It must not be connected to D.C. mains. Note: The mains lead of the video is fitted with a moulded plug.
  • Page 2 10 cm 10 cm Use - If your video recorder or a tape has been kept in a cold place for some time, like for example in a car boot in winter, wait approximately 2 hours before using your video recorder. The openings above and below are for ventilation purposes. They should not be blocked.

  • Page 3: Table Of Contents

    - Display - Tapes Viewing ......8-9 - A TV channel - A tape POWER STANDby <...

  • Page 4: Remote Control

    Your remote control can be used to control certain m a y n o t b e c o m p a t i b l e o r functions on most TV sets. Before using it, you need to...

  • Page 5: Storing The Tv Code

    PHONOLA ..019-020-021 CGE ..... .016 PIONEER ....001-005 model, it may be necessary CONTINENTAL EDISON .

  • Page 6: Controlling The Vcr

    CONTROLLING THE VCR CONTROLLING THE VCR Pour commander le téléviseur, To control your VCR, position the selector on vcr a . appuyez d’abord sur cette touche. To switch the video To start instant recording of what recorder on and off...

  • Page 7: Storing Another Vcr Code Or A Thomson Dvd Code

    NEC ........039...

  • Page 8: Controlling The Operation

    Source Variable slow motion selection See page 29 Play - Pause Forward- Reverse To double the recording Tape eject time of a tape with LP. Add an index Sound Record dubbing Stop RECORD - Remove an index (See page 20)

  • Page 9: Display

    : Fast play (Super Long Play) : Variable slow motion : Freeze frame PAUSE NTSC PAL : Play in NTSC for a PAL TV set : Pause-record REC-P VIDEO: The video recorder transmits the picture : Currently recording : Programmed recording...

  • Page 10: Viewing

    VIEWING With the status key, you can select the image to be displayed on your TV screen. Press this key successively to display: (1) • the current TV programme image, (2) • the VCR image including display of VCR status, (3) •...

  • Page 11: Viewing

    VIEWING A TAPE If you don't want this menu to come up every time you load a tape, deactivate the option Tape library in the PREFERENCES menu (page 24). Refer also to pages 15 to 17, TAPE LIBRARY function.

  • Page 12: Recording A Tape

    RECORDING A TAPE You can record TV programmes or the pictures from a set connected to one of the sockets AV1/AV2/AV3 or AV4. RECORDING Insert a tape. To check the settings for your recording. You can call up the information screen (see page 8).
  • Page 13 The VCR is switched on and selects by itself safety tab of the cassette isn’t broken. t h e s a m e c h a n n e l a s t h e c u r r e n t T V programme to start recording.
  • Page 14 Full operation of the NAVICLICK function will be achieved the day following the first installation of your video recorder. When pressing the status key, the name of the current programme is displayed in the lower part of the screen. • Choose the station on your VCR.
  • Page 15 (should you wish to make any change, be possible. refer to page 19 – PROGRAMMING OPTIONS); - or press the menu key when the VCR is set on standby-programming (VCR switched off). Note: When searching for a given...

  • Page 16: Subtitle Feature

    RECORD TIMER menu, select Subtitle Yes to record the subtitles of the programme. NOTE: Subtitles in colour available in certain programmes will be recorded and reproduced in black and white by your video recorder. To always record subtitles in your timer recordings.
  • Page 17 The TAPE LIBRARY function enables you: - to create and manage a library with up to 200 tapes, - to automatically retrieve and play a broadcast recorded by you. TAPE LIBRARY – CONFIGURATION WHEN LOADING A BLANK TAPE FOR RECORDING - load a blank tape into your video recorder.
  • Page 18 WHEN LOADING A PRERECORDED TAPE OR TAPE RECORDED ON YOUR OLD VCR When you have tapes recorded on another video recorder, you may integrate them in your tape library, but only with one title, as the detailed contents cannot be rebuilt. Repeat the previously described steps.
  • Page 19 Tape Library: This function is active only for recordings with a length of over 10 minutes. LISTING ALL YOUR RECORDINGS WITHOUT LOADING A TAPE Display the SUMMARY menu, then choose Tape Library with V or W. Confirm with ok .

  • Page 20: Programming A Recording

    The line Stop time is selected. You can use a certain number of options to complete programming. If you wish to check your programming, press OK (see the boxed menu TIMER REVIEW - see page 13), if not, press exit . Switch off the video recorder.

  • Page 21: Without Videoplus+ Codes

    In the case of error, or to quit, press the key. Programme the recording of the pictures of a given channel by entering (or with B) its number (Pr-) or select AV1, AV2, AV3, In the United Kingdom and in Ireland, SHOWVIEW DELUXE is replaced by AV4 or SA.

  • Page 22: Tape Control While Playing

    CLEAR INDEX First search the cassette for the index mark as explained above. The VCR then stops before the index mark. Select the line Clear index with W. Validate with key OK (the VCR must be on STOP). GO TO COUNTER/GO TO REMAINING TIME Enter a value with key C or B.
  • Page 23 (status menu, c o p y m o d e ) . C o u n t i n g s t a r t s u p o n loading of the cassette or the position 00h00m00s of the counter.

  • Page 24: Adjusting The Picture

    If the pictures of the film you wish to record are of poor quality (scrambled TV reception), if the film is in black and white or if wish to give your recording an old film effect, tick off the box (þ) Black & white with the OK key.
  • Page 25 NTSC PAL appears on the display. S L P i n t h e v i d e o r e c o r d e r d i s p l a y indicates that the tape has been recorded in Super Long Play.

  • Page 26: Preferences

    With the menu key, call up the SUMMARY menu and with W or V, select the line Preferences. Validate with OK . TAPE LIBRARY Tick off this option (þ) to display the TAPE LIBRARY menu at any time you load a tape into the video recorder. BEEP SOUND The setting described below enables you to obtain a beep sound each time you press a key (of the remote control or the video recorder).
  • Page 27 Recording of a programme can be started by a satellite receiver (or another set). Tick In the case of error, or to quit, this box (þ) off ( OK key) so that you have to press the key. programme only one set: your satellite receiver.

  • Page 28: Hi-Fi Functions

    IN THE PLAY MODE Load a tape and press the PLAY key. With the menu key, call up the SUMMARY menu and with W or V, select the line HiFi controls. Validate with OK . This menu comes up. Select the sound tracks with key C or B.

  • Page 29: In The Recording Mode

    1 during a bilingual broadcast. Manual… to adjust the sound manually D e p e n d i n g o n t h e s o u n d o f t h e T V (in this case, select Level, then adjust channel (stereo, NICAM or mono), the with C or B).

  • Page 30: Sound Dubbing

    - A u 3 if you use the front side sockets (white, red, yellow cinch), - A u 1, A u 2, or A u 4 for the rear sockets (refer to the installation manual, page 20), - MIC if you use a high impedance microphone (for dubbing of a silent film) connected to the MICROPHONE socket on the VCR front side.

  • Page 31: Splicing By Insertion

    Select the unit or source used (video recorder, SOUND DUBBING Sound dubbing is not possible on a tape camcorder, video unit or TV channel) to record the recorded in the long play mode (LP). sequence to be inserted on your VPH7090.

  • Page 32: Sequence Editing

    ADDITIONAL INFORMATION This function enables you to choose different sequences on a tape on your VPH7090 and view them one after another. If you connect a second video recorder fitted with a compatible PAUSE socket you may recopy these sequences in automatic splicing.

  • Page 33: Additional Information

    - Recording stopped by VPS - During the recording of a VPS programme, press key vps . The recording will stop when the programme is really over. - Recording started by VPS - Put the video recorder in pause-record mode, then press key vps . As soon as the VPS programme starts, the video recorder starts to record.

  • Page 34: Understanding

    The next time you use a Videoplus+ number relating to your programming the video will automatically know where to go. In this way the video will build up a library of your channel locations.

  • Page 35: Identifying And Correcting Problems

    IDENTIFYING AND CORRECTING PROBLEMS If you have any problems, check the counter measure for each symptoms listed below. If the problem persists, note your VCR Model Number and Serial Number which can be found on the back of your VCR. Contact your nearest authorized service centre or dealer for assistance.

Table of Contents