Download Print this page
THOMSON VP4850F - annexe 1 User Manual
THOMSON VP4850F - annexe 1 User Manual

THOMSON VP4850F - annexe 1 User Manual

Hide thumbs Also See for VP4850F - annexe 1:

Advertisement

Quick Links

The type and production number of your appliance are printed on the guarantee certificate
delivered with your video recorder. Keep this certificate as well as the invoice. These
documents are indispensable for claiming your guarantee rights.
• All repairs during the guarantee period must be carried out by an authorised
technician representing our brand.
• If this condition is not met, your rights will no longer be valid.
• Never open the appliance yourself, since this may be dangerous for you or damage
the equipment.
Setting up - Ensure that the mains supply in your house complies with that indicated on
the identification sticker located on the back of your appliance.
Install the video recorder horizontally, away from any source of heat (fireplace) or
appliances creating strong magnetic or electric fields.
If you install your video recorder in a purpose-built unit, check that the air vents are not
obstructed. Allow a clearance of 10 cm on either side and at the rear of the appliance and
at least 7 cm above.
10 cm
Use - If your appliance, or a cassette, has been stored in a very cold atmosphere for a
certain amount of time (transported during winter for example), wait approximately 2
hours before using your video recorder. The openings located on the top and the bottom
are for ventilation purposes. They should not be obstructed. In the event of lightning, the
appliance should be disconnected from the external aerial.
Even when the on/off switch is off, the video recorder is not completely cut off from the
mains. To disconnect it completely, it is necessary to remove the mains plug from the mains
socket
Under no circumstances should this appliance be put to industrial use. It is designed solely
for domestic operation.
Maintenance - Use a dry, clean, soft cloth. Do not use any scouring agents, solvents or
abrasive products, etc. If an object or liquid enters inside the appliance, unplug it
immediately and have it checked by an authorised technician.
It is illegal to make total or partial copies of recordings protected by copyright laws without
explicit permission of the copyright holder.
Guarantee
Precautions
7 cm
10 cm
MINITEL IN FRANCE
10 cm
3615 THOMSON
*
* 1.29 FF per minute
7 cm

Advertisement

loading
Need help?

Need help?

Do you have a question about the VP4850F - annexe 1 and is the answer not in the manual?

Questions and answers

Summary of Contents for THOMSON VP4850F - annexe 1

  • Page 1 If you install your video recorder in a purpose-built unit, check that the air vents are not obstructed. Allow a clearance of 10 cm on either side and at the rear of the appliance and at least 7 cm above.
  • Page 2 C O N T E N T S Guarantee - Precautions Controlling the TV set Controlling the video recorder Monitoring the operation The menus Viewing a tape Preparing - Recording Recording a programme Record with automatic pause Programming with ShowView codes...
  • Page 3 Your remote control can be used to control certain functions on most TV sets. Before using it, you need to program it with one of the codes indicated in the table on the last page of this manual.
  • Page 4 CONTROLLING the video recorder Point the remote control towards the video recorder when you press a key. To control your video recorder, Pour commander le magnétoscope, press this key first. appuyez d’abord sur cette touche. To display the main menu then choose other menus.
  • Page 5 MONITORING t h e o p e r a t i o n VIDEO ––––– he display : Tape counter (running time). ––––– : Play. – > ––––– : Fast play. 09:53 : Time. – > – > ––––– : Forward.
  • Page 6: Enter Code

    VP4850F EXIT To view the pictures or the menus of the video recorder, you must switch the TV set on by selecting the channel assigned to the video recorder (see the Set-up Manual, page 5, step 2).
  • Page 7 V I E W I N G To view a tape and explore the recordings on it, freeze a frame, find precise sequences with the fast search, rewind to the start or the end of the tape. Sur la façade du Sur votre...
  • Page 8 R E C O R D I N G You can record TV programmes or pictures a p r o g r a m m e transmitted by a AV unit connected to the back of the video recorder (SCART sockets AV1/AV2).
  • Page 9 PROGRAMMING r e c o r d i n g You can programme a recording using the ShowView codes in your TV listings magazine or using the manual programming procedure, if you do not know the codes. with ShowView codes Display the SHOWVIEW menu.
  • Page 10: Display Main Menu

    SHOWVIEW ECO. MODE ON/off EXIT Select TIMER. 1 PROG START STOP DATE PR - - - : - - - - : - - 01.01 SET TIMER CANCEL TIMER NEXT TIMER EXIT Select SET TIMER. 1 PROG START STOP DATE PR - - - : - - - - : - - 01.01...
  • Page 11 Camcorder Satellite receiver Other video recorder Video disk player Display the control screen with key EXIT/STATUS and select socket AV1 or AV2 with the AV key on the remote control. Pictures from an appliance switched on play mode COUNTER REMAIN...
  • Page 12 (filmed on your camcorder) on video tapes. Display the control screen with key EXIT/STATUS and select AV3 with the AV key on the remote control. With compatible camcorders, the pause socket makes copying easy by triggering off recording...
  • Page 13 G 14:30 Programming the VPS/PDC recording The programming menu (pages 8, 9) proposes options in which you will find the VPS or PDC line. Select this option to start programming at the real start and finish times of the programme.
  • Page 14 Erasing the programming Switch on the video recorder and select TIMER in the main menu (keys A, 1). Seek the programming (from 1 to 8) with key 3 and erase it by pressing key 2.
  • Page 15 NTSC is the television standard used in the United States, Japan and other countries. Your video recorder can play VHS-NTSC tapes, but you must have a PAL standard TV set. Most PAL TV sets provide satisfactory pictures from NTSC tapes.
  • Page 16 - replug your video recorder and turn it on using the remote control. Both your video recorder and its remote control are now working in code B. To flip back into code A, follow the same steps with one exception - press key 0 and 1 (instead of 0 and 2).
  • Page 17 Set-up manual, chapter “Manual channel set-up”. Connection by the AUDIO/VIDEO 1 or 2 socket - If your satellite receiver is connected to the video recorder by the audio video socket, do not choose a number but select the AV1 or AV2 socket.
  • Page 18 1 - Press key 2 - Hold key E down and key in the 2-digit code corresponding to the make of your TV set. Depending on your TV set model, it may be necessary to try several of the proposed codes.
  • Page 19 Long play (LP) - Super long play ( VP4850F) In our efforts to improve the quality of our products, we reserve the right to change their features. The information contained in these instructions are therefore liable to change and are not contractual.