THOMSON REMOTE COMMUNICATION - V3.0 User Manual page 49

SECTION 2
display and buttons work as it were the actual device. Additional information
includes the digital fault status and labels, analog fault status and present
measured values.
The figure below shows the view of a TSC 800 connected to a remote CIM. Just
as the MEC 20, the black part of the view is a direct emulation of the TSC 800
front panel. The faults and values are displayed and updated frequently.
4.3.2. Controller Commands
The controllers can also be commanded to perform control functions remotely.
The control functions can be found under the MEC 20 Command or TSC 800
Command items of the Controller menu. The controller in the current view is the
PM055 Rev 2 00/08/31
THS 2000 SOFTWARE PROGRAM
43
Thomson Technology