THOMSON REMOTE COMMUNICATION - V3.0 User Manual page 37

SECTION 2
Note: CIM versions prior to version 3.0 did not support the call-all-numbers
feature; this option is grayed-out for those devices. Also, in older CIM versions,
all the phone numbers shared the same number of attempts; this is reflected in
this dialog box by tying all there attempts choices together, so if one is changed
they are all changed.
3.4.4. CIM Database
All the properties of the CIM described in this chapter are stored in an internal
database. This database, and thus the CIM properties, can be reset to factory
default values by initializing the database. The command to initialize the
database can be found in the CIM Database tab of the Current Site Properties
dialog box, as shown here.
PM055 Rev 2 00/08/31
THS 2000 SOFTWARE PROGRAM
31
Thomson Technology