Troubleshooting; Maintenance; Explanation Of Symbols - F.F. Group CHD 12V PLUS Original Instructions Manual

8 | English
electrical cables, water or gas pipes running below
the surface by use of a metal/voltage detector. Do
not expose either the drill or charger to rain or water.
Do not overcharge the battery (more than six hours)
as this could damage the battery cells.

TROUBLESHOOTING

NOTE: Remove plug and/or battery before carrying
out any adjustment, servicing or maintenance.
Problem Cause
1. Flat battery.
Drill does 2. Forward/
not work Reverse not
selected.
1. Lock screw
Chuck does
loose.
not close or
2. Swarf in
grip
chuck.

MAINTENANCE

Regular inspection and cleaning reduces the neces-
sity for maintenance operations and will keep your
tool in good working condition. The motor must be
correctly ventilated during tool operation. For this
reason avoid blocking the air inlets.
HANDLING & STORAGE
Although this machine is small in size, care must still
be taken when handling and lifting. Dropping this ma-
chine will have an eff ect on the accuracy and may also
result in personal injury. This machine is not a toy and
must be respected.
The environment will have a negative result on its op-
eration if you are not careful. If the air is damp, com-
ponents will rust. If the machine is unprotected from
dust and debris; components will become clogged:
And if not cleaned and maintained correctly or regu-
larly the machine will not perform at its best.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing as
waste. Machine, accessories and packaging
should be sorted for environment - friendly
recycling. The plastic components are labeled
for categorized recycling.

EXPLANATION OF SYMBOLS

Double insulation
For indoor use only. Do not expose to
rain.
Remedy
1. Charge bat-
tery.
2. Select
forward or
reverse.
1. Open chuck
fully and
tighten screw
(left hand
thread).
2. Clean inside
chuck with
cleaning fl uid.
GUARANTEE
DECLARATION OF CONFORMITY
 We declare under our sole responsibility that this
 Technical fi le at:
Wear eye protection.
Damage to lungs if an eff ective dust
mask is not worn.
Wear protective gloves
Damage to hearing if eff ective hearing
protection is not worn.
To reduce the risk of injury, the user
must read and understand this manual
before using this product.
Important!
Conforms to relevant safety standards
Li-ion battery must be recycled or
disposed of properly
This product is warranted in accordance with the legal/
country specifi c regulations, eff ective from the date
of purchase by the fi rst user. Damage attributable to
normal wear and tear, overload or improper handling
will be excluded from the guarantee. In case of a claim,
please send the machine, completely assembled, to
your dealer or the service Centre for electric power
tools.
product is in conformity with the following standards
or standardized documents: EN 55014-1, EN 55014-2,
EN 60745-1, EN 60745-2-1, EN 60745-2-2 in accor-
dance with the provisions of the directives 2014/30/
EU, 2006/42/EC.
FF GROUP TOOL INDUSTRIES S.A., FF GROUP TOOL INDUSTRIES S.A.,
19300, Aspropyrgos-Greece 19300, Aspropyrgos-Greece
Loudovikos Tsirigiotis
Operations & Engineering
FF GROUP TOOL INDUSTRIES S.A., 19300
FF GROUP TOOL INDUSTRIES S.A., 19300
Aspropyrgos-Greece. 5/03/2018