Universal Remote Control - THOMSON DTH4200 - annexe 1 Manual

DTH4200-GB-BEI 4/05/00 15:44
U
niversal remote control
Universal remote control setting
You have the option to set your remote control to control your TV set and/or video recorder. This
enables you to control your video devices with a single remote control.
1
Place the switch
control.
DVD
2
Look for the 3-digit code of your device's brand in the table
of brands on the next page (Highlight it with a pencil, for
example).
3 menu
Hold the
corresponding to the make of your TV set. Depending on
your TV set model, it may be necessary to try several of the
proposed codes.
4
Release the
• Try to operate the device by switching it
B B
key.
• If it does not work, repeat from step 2 with another 3-digit
code.
• Not all TV, VCR can be operated with this universal remote control.
• Try out which functions you can control with the remote control.
• Try to find the most efficient code for your brand (for brands with several codes).
If you have replaced the batteries of the remote control, perform the remote control
•
set-up again.
36
Page 36
dvd • vcr • tv
on the device you want to
Video recorder
key (19) down and key in the 3-digit code
menu
key (19).
TV set
on / off
with the