Languages; Virtual 3-D Surround Sound; Audio Language - THOMSON DTH4200 - annexe 1 Manual

DTH4200-GB-BEI 4/05/00 15:44
3 D
-
Virtual 3-D Surround Sound (for DVDs, Video CDs, Audio CDs)
If you use a stereo TV or a two-channel stereo system, be sure that in the audio options of the setup menu,
"Dolby Digital Out" and "MPEG-2 Digital Out" are set to "PCM" (see page 15).
1 PLAY
Press
2 surround
Press
3-D surround sound strip.
3
Press the
4 Press surround
• For optimum effects it is recommended that the distance between the TV set and the listening position
should be about 3 or 4 times the distance between the front speakers.
• Turn off the TV set surround sound and other surround effects (HiFi system).
• 3-D surround does not work with LPCM or DTS sound tracks of DVD discs, or with DTS track of
Audio CDs. It is possible only on DVDs with Dolby Surround or Dolby Digital.
• This feature only operates from the Analog Audio out and from the Scart connector.
It will not operate from the Digital Audio Out (coaxial / optical), if "Digital Audio Out" or "MPEG-
2" Digital Out" are set to "BITSTREAM" in the Audio options of the setup menu (see page 15).
• The simulated surround effect depends on the disc contents.
• You can also press the
• This technology is manufactured under license from Desper Products Inc.
• "SPATIALIZER
Audio language (for DVDs)
• With some discs, it is possible to change the language of a film and its subtitles. Two coloured keys
( , ) on your remote control offer easy access to this function while viewing.
• Some DVDs provide a disc menu. Temporary change of languages (audio, subtitles) may also be possible
by pressing the
A - Using the player info display.
1 PLAY
Press
2 Press the red
on-screen with (possibly) the abbreviation of the
language and the corresponding audio format.
3
Select a language with the
4
To exit the Audio display, press the
clear
• Press
B - Using the Disc Menu (if available).
1 PLAY
Press
2 menu
Press the
screen with (possibly) the Audio languages for dialogues
available on that particular DVD disc.
3
Select the desired language with the
ok
then press
24
Page 24
Surround / Dialogue languages
(27) to start playback.
" " key (6) on the remote control, to display the
arrows (14, 17) to change the setting.
" " key (6) to remove the display.
3D Surround
key on the front panel to switch "On" or "Off" the function.
R ", "N-2-2 TM " and the "Circle in square" are Trademarks owned by Desper Products Inc.
menu
key (19) during playback.
A movie or video programme may be recorded in more than one language (up to 8) on
the disc. So you can hear the dialogue in your own language (if available) or in the
original language of the movie. Set-up, page 5. You have to perform either
setting.
(27) to start playback.
key (8); the audio display appears
arrows (14, 17) .
red
(25) to remove the banner without making changes.
(27) to start playback.
key (19); the menu of the disc appears on-
(15) to confirm.
ENG DOLBY DIGITAL 5.1 CH
FRA MPEG-2 2 CH
key (8).
Dialogue Language
1
2
3
arrows (14, 17),
4
On
Off
A B
or
DISC MENU
English
Deutsch
Français
Italiano