IB5400GB
3/09/01 16:14
U
niversal remote control
Universal remote control setting
You have the option to set your remote control to control your TV set and/or video recorder. This
enables you to control your video equipment with a single remote control.
1.
dvd • vcr • tv
Place the
to control.
Your DTH 5400
DVD
2.
Look for the 3-digit code of your equipment's brand in the
table of brands on the page 32 (Highlight it with a pencil, for
example).
3.
menu
Hold the
corresponding to the make of your TV set. Depending on
your TV set model, it may be necessary to try several of the
proposed codes.
4.
Release the
• Try to operate the equipment by switching it
B
B
the
key.
• If it does not work, repeat from step 2 with another 3-digit
code.
• Not all TV and VCRs can be operated with this universal remote control.
• Try out which functions you can control with the remote control.
• Try to find the best code for your model (for brands with several codes).
If you have replaced the batteries of the remote control, perform the remote control
•
set-up again.
30
Page 30
switch on the equipment you want
Video recorder
key (19) down and key in the 3-digit code
menu
key (19).
TV set
on / off
with