Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Ronix 8653
Summary of Contents for Ronix 8653
- Page 1 230Nm BRUSHLESS IMPACT SCREW DRIVER 8653...
-
Page 3: Technical Specification
TECHNICAL SPECIFICATION 8653 Model Battery Voltage Battery capacity 2.0Ah Battery Chemistry Lithium Forward mode Reverse mode Chuck Size 6.35mm 1200RPM 1900RPM No-load Speed 2500RPM 3200RPM 1400RPM 2200RPM Impact Rate 3000RPM 4000IPM Standard Bolt Max M10 High Tensile Bolt Max M8... -
Page 4: Part List
PART LIST 1/4 in. Square Drive Directional Switch and Trigger lock Trigger Handle Electronic Clutch Control Pannel Belt Clip Battery Pack Lock Buttton 230Nm BRUSHLESS IMPACT SCREW DRIVER... -
Page 5: Electrical Safety
WARNING! READ,UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY. SAFETY WORKPLACE SECURITY 1- Keep the area clean and well lit. Cluttered or dark areas can cause accidents. - Page 6 to a rotating part of the tool may result in personal injury. 4- Do not rush. Maintain proper footing and balance at all times. This allows better control of the tool in unexpected situations. 5- Dress appropriately. Do not wear loose clothing or jewelry. Keep hair, clothing and gloves away from moving parts.
-
Page 7: Precautions For Use
instructions, taking into account the working conditions and the work to be done. The use of the tool for operations other than those provided can lead to dangerous situations. PRECAUTIONS FOR USE 1- Do not use any other charger than the one specified by the manufacturer. -
Page 8: Maintenance
MAINTENANCE 1- Recharge the battery at least once a year to maintain battery life. ENVIRONMENTAL PROTECTION This device uses electronic components, so they should not be deposited with household garbagel Please help by collaborating to protect resources and the environment. Dispose of these products through relevant recycling services, if any. -
Page 9: Operating The Tool
- All LEDs illuminated: The battery is fully charged. - Only one Green LED illuminated: The battery is empty, recharge the battery. - The LED lamp can be used in poor lighting conditions to illuminated the work area. The LED lamp will light up as soon as you press the trigger. LED LAMP The LED lamp (7) can be used in poor lighting conditions to illuminate the work area. - Page 10 The motor has an electronic clutch with Four different forward speed setting: 1,2,3 and 4 (4 is the highest) The speed setting is adjusted by pushing the button on the Electronic clutch control panel (10) on the base of the tool. If the trigger is momentarily pushed the Electronic clutch will be activated.
Need help?
Do you have a question about the 8653 and is the answer not in the manual?
Questions and answers