1. Manuals
  2. Brands
  3. Ronix Manuals
  4. Impact Driver
  5. RA-1211
  6. Manual

Ronix RA-1211 Manual

Air impact wrench
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
AIR IMPACT WRENCH
RA-1211

Advertisement

Table of Contents
loading

Related Manuals for Ronix RA-1211

Summary of Contents for Ronix RA-1211

  • Page 1 AIR IMPACT WRENCH RA-1211...

  • Page 2: Specifications

    SPECIFICATIONS Model RA-1211 Head Style Fixed Square Max torque 1000ft.lb, 1800N.m Working Pressure 90Psi, 0.63MPa, 6.3Bar Drive anvil size 3/4'' No-load speed 7000RPM Bolt size 1'', 25mm Air inlet (NPT) 3/8", 9.52mm Air hose (ID) 1/2", 12.7mm Avg air consumption 9.5CFM, 269L/min...

  • Page 3: Parts List

    PARTS LIST Square Drive Head Direction Of Trigger Rotation Knob Air Inlet IMPORTANT SAFETY RULES Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tool’s construction and design: 1- Damage to lungs if an effective dust mask is not worn.
  • Page 4 7- Always keep your air tool clean and lubricated. Daily lubrication is essential to avoid internal corrosion and possible failure. 8- Do not wear watches, rings bracelets or loose clothing when using air tools. 9- Using only light weight coil hoses from a tool to the wall or compressor coupling.

  • Page 5: Air Supply

    Air compressor 2-1/2 HP 3+ HP size & power Light duty and Light duty and Medium duty and 5-6 Gallons intermittent use intermittent use intermittent use Light duty and Medium duty and Heavy duty and 8-11 Gallons intermittent intermittent use continuous use Heavy duty and Medium duty...

  • Page 6: Loading And Operation

    LOADING AND OPERATION ENSURE YOU READ, UNDERSTAND AND APPLY SAFETY INSTRUCTIONS BEFORE USE. 1- Only use impact sockets which are specifically designed for use with an impact wrench. 2- Connect the wrench to the air hose. 3- Place the socket over the subject nut and depress the trigger to operate the wrench.
  • Page 7 the paper. Excessive amounts of oil should be avoided. Quick Quick Connector Connector Filter Lubricator AirTool Compressor Cut-off Valve Quick Quick Coupler Coupler Regulator Air Hose 0 - 8.5 Fig 4 In the event that it becomes necessary to store the tool for an extended period of time (overnight, weekend, etc.), it should receive a generous amount of lubrication at that time.

  • Page 8: Maintenance

    MAINTENANCE Disconnect wrench from air supply before changing accessories, servicing or performing maintenance. Replace or repair damaged parts. Use genuine parts only. Non-authorized parts may be dangerous. 1- Lubricate the air wrench daily with a few drops of air tool oil dripped into the air inlet.

  • Page 9: Troubleshooting

    TROUBLE SHOOTING The following form lists the common operating system with problem and solutions. If any of the following symptoms appears during your operating, stop using the tool immediately, or serious personal injury could result. Only a qualified persons or an authorized service center can perform repairs or replacement of tool.
  • Page 10 - Pour air tool lubricating tool into air inlet. - Operate tool in short bursts of forward Tools will not run. - One or more motor and/or reverse rotation where applicable. Air flows freely vanes stuck due to - Tap motor housing gently with plastic from exhaust material build up.

Table of Contents