Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ronix 8654
Summary of Contents for Ronix 8654
- Page 1 BRUSHLESS IMPACT WRENCH 350 8654...
-
Page 3: Technical Specification
TECHNICAL SPECIFICATION 8654 Model Battery Voltage Battery Capacity 2.0Ah Battery Chemistry Lithium Forward Mode Reverse Mode Chuck Size 12.7mm(1/2") 0-2000RPM No-load Speed 0-2400RPM 0-2500IPM Impact Rate 0-3500IPM Standard Bolt Max M16 High Tensile Bolt Max M14 220Nm Torque Rate 350Nm... -
Page 4: Part List
PART LIST 1/2 in. Square Drive Cooling air outlet Directional switch and trigger lock Trigger Handle Electronic Clutch & Auto Brake LED Light Battery Button BRUSHLESS IMPACT WRENCH 350Nm... -
Page 5: Electrical Safety
WARNING! READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY. SAFETY WORKPLACE SECURITY 1- Keep the area clean and well lit. Cluttered or dark areas can cause accidents. - Page 6 attached to a rotating part of the tool may result in personal injury. 4- Do not rush. Maintain proper footing and balance at all times. This allows better control of the tool in unexpected situations. 5- Dress appropriately. Do not wear loose clothing or jewelry. Keep hair, clothing and gloves away from moving parts.
-
Page 7: Precautions For Use
instructions, taking into account the working conditions and the work to be done. The use of the tool for operations other than those provided can lead to dangerous situations. PRECAUTIONS FOR USE 1- Do not use any other charger than the one specified by the manufacturer. -
Page 8: Maintenance
any cleaner or detergent, they can damage the plastic parts of the tool. Ensure that no water enters the tool. MAINTENANCE ENVIRONMENTAL PROTECTION This device uses electronic components, so they should not be deposited with household garbagel Please help by collaborating to protect resources and the environment. - Page 9 - All LED’s illuminated: The battery is fully charged. - Yellow and red LED illuminated: The battery has an adequate remaining charge. - Red LED: The battery is empty, recharge the battery. USB POWER PORT You can power any portable device that uses a USB power port . The output is 5 volts at 1.5 mA maximum output.
-
Page 10: Operating The Tool
OPERATING THE TOOL To activate the tool, press the Trigger (6) and keep ii pressed. To switch off the machine, release the trigger. The trigger is variable speed and the speed depends on the amount of pressure you apply to the trigger. Light pressure on the trigger results in a low rotational speed. -
Page 11: Operating Tips
trigger is pushed the tool will start hammering in reverse. As soon as the bolt breaks loose and there is no resistance the tool will immediately stop reverse motion. This feature is meant for controlled loosening of lug nuts without backing fully off the stud. Uncontrolled spinning can damage the treads on the end of the stud or bolt.
Need help?
Do you have a question about the 8654 and is the answer not in the manual?
Questions and answers