Troubleshooting - Bosch HGV1F0U52S User Manual And Installation Instructions

en Troubleshooting

Troubleshooting

16 Troubleshooting
You can rectify minor faults on your appliance yourself.
Read the troubleshooting information before contacting
after-sales service. This will avoid unnecessary costs.
WARNING ‒ Risk of injury!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
If the appliance is defective, call Customer Service.
▶
→ "Customer Service", Page 28
16.1 Malfunctions
Fault
Burner goes out
straight after being ig-
nited.
The burner flame is
not uniform.
The burner flame
goes out while the
appliance is in opera-
tion.
The appliance is not
working.
The burner does not
ignite.
The flame for the
oven does not burn
through all outlet
openings.
All dishes prepared in
the oven burn within
a short period of
time.
The fan position is
not working.
The oven switches
off.
26
Cause and troubleshooting
The control knob was not held down for long enough.
Keep the control knob pressed in for a few seconds after ignition.
1.
Push the control knob in firmly.
2.
Openings on the burner are soiled.
Clean and dry the openings on the burner.
▶
The burner parts are positioned incorrectly.
Position the burner parts precisely and evenly.
1.
Ensure that the locking catches click into place in the recesses.
2.
Openings on the burner are soiled.
Clean and dry the openings on the burner.
▶
Gas cylinder is empty.
Replace the gas cylinder.
▶
The mains plug of the power cord is not plugged in.
Connect the appliance to the power supply.
▶
The circuit breaker is faulty.
Check the circuit breaker in the fuse box.
▶
There has been a power cut.
Check whether the lighting in your room or other appliances are working.
▶
The safety valve for the gas line is closed.
Open the safety valve for the gas line.
▶
There has been a power cut.
Check whether the lighting in your room or other appliances are working.
▶
The ignition plugs are wet.
Light the gas burner with a gas lighter or a match.
▶
Openings on the burner are soiled.
The burner must be professionally cleaned.
▶
The thermostat is faulty.
Call customer service.
▶
The grill selector is switched on.
Ensure that the grill selector is switched off.
▶
The fan position is not selected.
Ensure that the fan position is switched on.
▶
The gas pressure is too high or too low.
Light the gas burner with a gas lighter or a match.
▶
WARNING ‒ Risk of electric shock!
Improper repairs are dangerous.
Repairs to the appliance should only be carried out
▶
by trained specialist staff.
Only use genuine spare parts when repairing the
▶
appliance.
If the power cord of this appliance is damaged, it
▶
must be replaced by the manufacturer, the manufac-
turer's Customer Service or a similarly qualified per-
son in order to prevent any risk.