Advertisement
Quick Links
This product can be set up
This product can be set up
This product can be set up
This product can be set up
This product can be set up
using any current web browser,
using any current web browser,
using any current web browser,
using any current web browser,
using any current web browser,
i.e., Internet Explorer 6 or
i.e., Internet Explorer 6 or
i.e., Internet Explorer 6 or
i.e., Internet Explorer 6 or
i.e., Internet Explorer 6 or
Netscape Navigator 6.
Netscape Navigator 6.
Netscape Navigator 6.
Netscape Navigator 6.
Netscape Navigator 6.
Before You Begin
If you purchased this Network Security Firewall to connect to your high-speed Internet
connection in a secure manner, you must have either an Ethernet-based Cable or DSL
modem with an established Internet account from an Internet Service Provider (ISP).
Check Your Package Contents
If any of the above items are missing, please contact your reseller.
©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and
DFL-1100 Network Security Firewall
CD-ROM (containing Manual and Warranty)
Ethernet (CAT5 UTP/Straight Through) Cable
Ethernet (CAT5 UTP/Cross over) Cable
Console Cable (RS 232)
Power Cord
specifications subject to change without notice.
1
DFL-1100
Network Security
Network Security
Network Security
Network Security
Network Security
Firewall
Firewall
Firewall
Firewall
Firewall
Advertisement
Related Manuals for D-Link DFL-1100
Summary of Contents for D-Link DFL-1100
- Page 1 Power Cord If any of the above items are missing, please contact your reseller. ©2004 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice.
- Page 2 First, connect the power cord to the Power Socket at the back panel of the DFL-1100 and then plug the other end of the power cord to a wall outlet or power strip. Press the switch to ON position The Power LED will turn ON to indicate proper operation.
-
Page 3: Restart Your Computer
Restart your computer To obtain a new IP address from the DFL-1100 you wll need to restart your computer. Make sure that the network adapter in your computer is configured properly first. Instructions on how to configure the network adapter to obtain an IP address automatically from the DFL-1100 can be found in the appendix. -
Page 4: Using The Setup Wizard
Enter or Return key. (The IP Address shown in the example above is the default setting. If you have changed the IP Address of the DFL-1100 to conform to a network, then input that IP Address in the web browser, instead... - Page 5 The Setup Wizard (continued) Welcome to the DFL-1100 connec- tion wizard! Here you can choose to either configure your firewall over HTTP or over Secure HTTP (HTTPS). Click on Connect to the unit via HTTPS instead to use Secure HTTP...
- Page 6 The Setup Wizard (continued) Step 3 - Configure WAN interface Select the appropriate configu- ration for the WAN interface, if you are unsure of which setting to select, please contact your Internet Service Provider. Click Next and continue to step 4 further down. If you are unsure of which setting to select, please contact your Internet Service Provider Click...
- Page 7 The Setup Wizard (continued) Step 3 - Static IP If you selected Static IP you have to fill out the IP address information provided to you by your ISP. You will need to complete all the required fields except for Secondary DNS Server.
- Page 8 The Setup Wizard (continued) Step 3 - PPTP If you selected PPTP you will need to specify both PPTP tunnel parameters and Physi- cal interface parameters. PPTP tunnel parameters: Enter the Username, Password and the PPTP Server IP address provided by your ISP. Physical interface param- eters: DHCP...
- Page 9 The Setup Wizard (continued) Step 3 - Big Pond If you selected Big Pond you will have to fill out the user name and password provided to you by your ISP. Click Next and continue to step 4 further down. Click Next...
- Page 10 (continued) Step 4 - Set up built-in DHCP server If you want to use the built-in DHCP Server in the DFL-1100, choose Enable DHCP Server in this screen. You then need to specify a range of IP addresses to hand out to the DHCP clients.
- Page 11 The Setup Wizard (continued) Setup Wizard Complete Click Restart to complete your configuration. Click Restart...
-
Page 12: Your Computer
To connect to the network, make sure the network adapter in your computer is configured properly. Here’s how to configure the network adapter to obtain an IP address automatically from the DFL-1100 Network Security Firewall. Microsoft Windows XP: Go to Start > right click on My Network Places >... - Page 13 Network Select Built-in Ethernet in the show pull down menu Select Using DHCP the Configure pull down menu Click on Apply Now The IP address information, the Subnet Mask, the DFL-1100 IP address and the Ethernet adapter address will appear...
-
Page 14: Technical Support
Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product. U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.
Need help?
Do you have a question about the DFL-1100 and is the answer not in the manual?
Questions and answers