Restart Your Computer - D-Link DFL-1100 Quick Installation Manual

Restart your computer

To obtain a new IP address from the DFL-1100 you wll need to
restart your computer. Make sure that the network adapter in your
computer is configured properly first. Instructions on how to
configure the network adapter to obtain an IP address
automatically from the DFL-1100 can be found in the appendix.
FRONT
POWER LED – a solid
light indicates a proper
connection to the power
supply.
BACK
STATUS LED – will flash
consistently to indicate
that the DFL-1100 is
working properly.
3
POWER RECEPTOR
and
Power switch