Using The Setup Wizard - D-Link DFL-1100 Quick Installation Manual

When you have completed the steps in this Quick Installation
Guide, your connected network should look similar to this:

Using The Setup Wizard

The DFL-1100 provides Web based configuration. You can config-
ure your DFL-1100 through your Netscape Communicator or
Internet Explorer browser in MS Windows, Macintosh or UNIX
based platforms.
Activate your browser. Then type the IP address of the DFL-1100
into the Location (for Netscape) or Address (for IE) field and press
"Enter." For example: http://192.168.1.1.
Open your Web browser and
type "http://192.168.1.1"
URL address box. Then press the
Enter or Return key.
(The IP Address shown in the example above is the default setting.
If you have changed the IP Address of the DFL-1100 to conform to
a network, then input that IP Address in the web browser, instead
of the default IP Address shown.)
into the
4