Advertisement
The Setup Wizard
Step 3 - Static IP
If you selected Static IP you
have to fill out the IP address
information provided to you by
your ISP. You will need to
complete all the required fields
except for Secondary DNS
Server. You should probably not
use the numbers displayed in
these fields, they are only used
as an example.
Click
Next
and continue to step
Click
Next
Step 3 - PPPoE
If you selected PPPoE (Point-to-
Point Protocol over Ethernet)
you will have to fill out the user
name and password provided to
you by your ISP. The PPPoE
Service Name field should be left
blank unless your ISP informs
you otherwise.
Click
Next
and continue to step
4 further down.
Click
Next
(continued)
7
Advertisement
Need help?
Do you have a question about the DFL-1100 and is the answer not in the manual?
Questions and answers