Magtek iDynamo 5 Gen III Installation And Operation Manual page 26

Appendix A - Technical Specifications
Code Protection
Eavesdrop Protection
Power Inputs
Battery Type
Battery Capacity
Battery Charge Time
Battery Time, Powered Off
Battery Time, Idle
Battery Time, Sleep Mode
Battery Time, Transactions
Voltage Requirements
Average Current Draw
Data Storage
Wired Connection Types
Wireless Connection Types
Wireless Connection
Frequency
Tested Operating System(s)
Operating Temperature
Operating Relative Humidity
Storage Temperature
iDynamo 5 Gen III| Secure Card Reader | Installation and Operation Manual
iDynamo Technical Specifications
Signed firmware. The device will not allow a host to install firmware
that is not properly signed by an authorized source.
Not Applicable
Electrical Characteristics
USB-C connector
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
Not Applicable
2.85 to 3.47 VDC from the attached host
5 VDC on USB-C power
From USB-C Connector:
270 mA (connected mode with swipe/contact/contactless enabled)
Additional draw (~1A, depends on host) when charging host's battery
From host:
85 mA from the attached host when magnetic read head is on; 0mA
otherwise
Not Applicable
Host Connection Characteristics
USB-C
Not Applicable
Not Applicable
Software Characteristics
iOS / Android / Windows
Environmental Tolerance
32°F to 95°F (0°C to 35°C)
5% to 90% without condensation
-4°F to 113°F (-20°C to 45°C)
Page 26 of 31 (D998200614-100)