Magtek iDynamo 5 Gen III Installation And Operation Manual page 16

4 - Installation
d) In the device's
7) Install and configure the host software you intend to use with iDynamo. If you do not yet have host
software, you can download a test tool from the App Store called
, to perform simple tests.
MagTek, Inc.
8) Make sure the host software is configured to look for the correct device.
9) Make sure the host software is configured to properly interpret incoming data from the device.
10) Use the host software or the
Card Reading. If you are using the
a) At the bottom of the app, select
iDynamo 5 Gen III| Secure Card Reader | Installation and Operation Manual
page, select
About Find App for Accessory
MagTek Test
MagTek Test
Lightning
Page 16 of 31 (D998200614-100)
.
MagTek Test
app to test swiping a card. For details, see section 6.3
app, follow these steps:
.
, published by