Magtek iDynamo 5 Gen III Installation And Operation Manual page 13

4 - Installation
5) Connect iDynamo 5 to the host. Make sure all components are seated firmly. If you are using the
mounting bracket, press the suction cup onto the rear of the host.
6) Use the host software or the
For details about reading each payment type, see section 6.3 Card Reading.
a) Open the
MagTek Test
b) Press the
USB
Disconnected
c) Press the
Connect
7) To disconnect from the host and power down iDynamo, unplug the cable from the device's USB-C
receptacle.
iDynamo 5 Gen III| Secure Card Reader | Installation and Operation Manual
MagTek Test
app on the Android host.
button in the top menu bar. The app should report the
.
button in the top menu bar.
Page 13 of 31 (D998200614-100)
app to connect to the device and to test swiping a card.
Connection State
USB Connection State
should report
Connected
is
.