4.1.2
Basic operation (factory setting)
Operation mode switchover
At powering on (external operation mode)
PU operation mode
(output frequency monitor)
Parameter setting mode
Value change
Output current monitor
(Refer to page 53)
Value change
Parameter clear
[Operation for displaying faults history]
Past eight faults can be displayed.
(The latest fault is ended by ".".)
When no fault history exists,
Operation panel
PU Jog operation mode
and frequency flicker.
Frequency setting has been
written and completed!!
STOP
Output voltage monitor
Display the
present setting
Parameter and a setting value
flicker alternately.
Parameter write is completed!!
All parameter
clear
Initial value
change list
(Refer to page 264)
is displayed.
(Example)
(Example)
Faults history clear
4
51