Storage Drawer; Interior Surfaces - GE JBS62 Owner's Manual

Table of Contents

Advertisement

Available languages

Available languages

Storage Drawer

To remove the drawer:
1. Pull the drawer out until it stops.
2. Lift the front of the drawer until the stops clear the
guides.
3. Remove the drawer.
To replace the drawer:
1. Place the drawer rails on the guides.
2. Push the drawer back until it stops.
3. Lift the front of the drawer and push back until the
stops clear the guides.
4. Lower the front of the drawer and push back until it
closes.

Interior Surfaces

The interior of your new oven can be cleaned manually.
Spillage of marinades, fruit juices, tomato sauces and basting liquids containing acids may cause discoloration and
should be wiped up as soon as safely possible. Let hot surfaces cool, then clean and rinse.
Manual Cleaning
Do not use oven cleaners (unless certified for use in
a self-cleaning oven), abrasive cleaners, strong liquid
cleansers, steel wool, scouring pads, or cleaning
powders on the interior of the oven. Clean with a mild
Oven Racks
All racks can be washed with warm, soapy water. All oven
racks may be cleaned by hand with an abrasive cleaner
or steel wool. Racks may be more difficult to slide after
cleaning.
Put some vegetable oil on a soft cloth or paper towel and
rub onto the left and right edges of the racks.
Oven Heating Elements
Do not clean the bake element or the broil element. Any
soil will burn off when the elements are heated. To clean
the oven floor, gently lift the bake element. Clean with
warm, soapy water.
49-2001599 Rev. 0
Rail
Rinse with clean water and dry with a soft cloth. When
cleaning surfaces, make sure that they are at room
temperature.
NOTE:
other lubricant sprays, will cause a discoloring or a rust
like color residue on the racks and cavity sides. To clean
this residue, use a soap and water or a vinegar and water
solution. Rinse with clean water and dry with a soft cloth.
Stop guide
®
or
17

Advertisement

Chapters

Table of Contents
loading

Table of Contents