Safety - Husqvarna RIGG 900 C Operator's Manual

Symbols on the product
Warning: This product can be dangerous
and cause serious injury or death to the
operator or others. Be careful and use the
product correctly.
High voltage.
Lifting point on the product.
Read the manual carefully and make
sure that you understand the instructions
before you use the product.
Use approved protective helmet, hearing
protection, eye protection and respiratory
protection.
Use approved protective gloves.
Use approved protective boots.
This product is in compliance with
applicable EU directives.
Note:
Other symbols/decals on the product refer to
special certification requirements for some markets.
Safety definitions
Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING:
injury or death for the operator or bystanders
if the instructions in the manual are not
obeyed.
4
Used if there is a risk of
Type plate
13
12
11
14
15
10
1. Product number
2. Product weight
3. Rated power
4. Rated voltage
5. Enclosure
6. Rated current
7. Frequency
8. Maximum slope angle
9. Manufacturer
10. Scannable code
11. Production year
12. Model
13. Serial number
14. Work load lift
15. Value work load lift
Product damage
We are not responsible for damages to our product if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not
from the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.

Safety

CAUTION:
damage to the product, other materials or
the adjacent area if the instructions in the
manual are not obeyed.
Note:
Used to give more information that is necessary
in a given situation.
1 2 3 4
XX
Used if there is a risk of
2157 - 001 - 07.03.2024
5
6
7
8
XX
9