Table of Contents
Advertisement
Speed Dialing and One-Touch Dialing
SPEED DIALING:
The unit allows keys "0" to "9" on the dial pad to be used for an additional 100 memory stations. These stations can then be
accessed by dialing two digits ("00" through "99"). Each station is capable of storing 30 digits.
ONE-TOUCH DIALING:
The unit is also equipped with ten One-Touch dialing stations (using the Direct Call buttons), each of which consists of two
locations; Telephone and FAX Number. Each location (Telephone/FAX No.) is capable of storing 30 digits.
eBe sure that the handset is on the cradle and that the
SP-PHONE button is off.
1 Push FUNCTION.
FUNCTION
Lan ac | SELECT COMMAND.
2
Enter the Station No. (00 to 99, 2 digits).
(e.g. If the Station No. is 46.)
3
Enter the telephone number, then push
AUTO/MEMORY. (e.g. Phone number is 234-5678.)
eae
234-5678
4
pi
SELECT
COMMAND
DISPLAY
®The display will show the entered telephone
number.
eTo store phone numbers in succession, repeat
Steps 2 and 3.
Programming the Phone Numbers for Speed Dialing
3-3
4
Push FUNCTION to end the operation.
FUNCTION
E You may also store FAX numbers into the
Speed Dia! keys similarly.
R Correcting an error while programming:
Push the STOP/CLEAR button instead of pushing the
AUTO/MEMORY button and then re-program the
correct number.
eThe new entry will be cleared and the previous
storage will remain untouched.
B To print out the stored phone number, see
page 1-17.
anal
m
r7
m
U
I
O
2
Mm
Advertisement
Table of Contents
