Initiating Voice Contact; During Transmission Or Reception; Receiving A Request For Contact - Panasonic AUTO-LOGIC KX-F120 Operating Instructions Manual

FACSIMILE
| Voice Contact
Receiving a Request for Contact
If the other party tries to contact you during transmission
1 Lift the handset or push SP-PHONE
or reception of a document, the following message will
-
appear on the LCD Display, and the unit will beep.
1
Initiating Voice Contact During
Transmission or Reception
@ During Transmission:
if you initiate voice contact during transmission, you will
be able to speak after all of the documents have
been transmitted.
The other party's unit will ring or beep depending on the
type of unit, after all of the documents have been
sent.
E During Reception:
If you initiate voice contact during receipt of a
document, you will be able to speak after receiving
the current page of the document.
The other party's unit will ring or beep depending on the
type of the unit after current page has been sent.
NOTES:
elf you receive a Request for Voice Contact and you do not pick up the handset or push the SP-PHONE button, the unit will
automatically switch to the Incoming Message recording mode, 10 seconds after the beeps are heard, if the AUTO/FAX
selector is set to "AUTO", and the AUTO ANSWER indicator is lit. l