One-Touch Dialer; Storing A Phone Number In The Direct Button - Panasonic KX-TG2583PW Operating Instructions Manual

One-Touch Dialer

You can store a phone number in the
stored number is dialed with a one-touch operation.

Storing a Phone Number in the DIRECT Button

Make sure the unit is in the standby mode initially.
(FUNCTION/EXIT/CH)
1 Press
Ö Ñ
2 Press or
points to "Program".
FWD/EDIT á
3 Press
4 While the arrow points to "Save
DIRECT#", press
Enter a phone number, up to 48 digits.
5
•Each time you press (INTERCOM/CLEAR) the
digit to the left of the cursor is erased. To erase
all digits, press and hold (INTERCOM/CLEAR).
•The last 32 digits number you entered will be
displayed. To confirm the remaining number, press
BACK Ü or FWD/EDIT á.
Ö
6 Press (Next key).
•If you want to edit the entered number, press
Ñ (Edit key) and return to step 5.
FWD/EDIT á
7 Press
•A beep sounds.
•To return to the standby mode, press
(FUNCTION/EXIT/CH).
•You can exit the programming mode any time by pressing (FUNCTION/EXIT/CH).
•If a pause is required for dialing, (REDIAL/PAUSE) can be stored in a phone
number in step 5. This counts as one digit (p. 54).
(DIRECT)
.
repeatedly until the arrow
(Yes key).
FWD/EDIT á
(Yes key).
(Save key).
button of the handset. The
H
Program
Calling pager
GF
H
Save DIRECT#
Set flash time
GF
IH G
1234567890123456
7890123456789012
IH G
1234567890123456
7890123456789012
F H
=Edit
1234567890123456
7890123456789012
Save DIRECT#
H
=Yes
H
=Yes
=Next
=Next
=Save
41