Preparing The Answering Machine; Esetting Up The Automatic Answer Mode; Epreparing The Icm Tape - Panasonic AUTO-LOGIC KX-F120 Operating Instructions Manual

Preparing the Answering Machine (con,
Setting Up Preparing the ICM Tape
the Automatic Answer Mode
After reviewing the Outgoing or Incoming Messages, the
unit will automatically reset itself to the Automatic Answer
mode and will be ready to answer the next call.
To record future messages
after the last message.
Leave the unit as It Is.
To record future messages from
the beginning of the tape.
When a call is received, the unit will answer and
REW mg
Push REW.
begin playing your OGM. If the caller's voice is
not heard within 5 seconds of the end of the @ If you use a new ICM tape, push the REW button to
OGM or the caller pushes the asterisk (Xx) reset the tape.
button, the FAX mode will automatically be
selected.
1 Push AUTO/ANS.
AUTO ANS
eThe AUTO/ANS indicator will light.
2 Set AUTO/FAX selector to AUTO.
AUTO: 'FAX
pan
R Before leaving the office, confirm that the AUTO/ANS
indicator is lit and the AUTO/FAX selector is set to
AUTO or FAX (as needed).
AUTO/FAX Selector
@ AUTO Position
>
Z
T
=
m
D
2
o
S
>
O
I
Z
m
If a voice is detected, the unit will function as an
Answering Machine.
FAX Positlon
When a call is received, the unit will function as a
Facsimile (FAX) Machine only. No OGM will be
played and no messages can be left on the
answering machine. Remote operation (from
another phone} is also impossible.
R To cancel the Automatic Answer mode, push the
AUTO/ANS button. The AUTO/ANS indicator will go
out. The unit will now function as a telephone.
2-3