About The Fw2000E; Description; Durability; Step One: Gather Tools And Materials - Inseego Wavemaker FW2000e Installation Manual

About the FW2000e

Description

The FW2000e delivers high-speed data over both 5G and 4G LTE networks using a proprietary high-
gain antenna array. The FW2000e connects to the optimal cellular network and provides data
connectivity to the existing in-building network.

Durability

The CPE has an environmental rating of IP67 for water and dust ingress and can operate within a
temperature range of -30°C to 70°C (-22 to 158°F).
Step one: gather tools and materials
•
Appropriate equipment to safely install the device at optimum height, e.g. ladder, scissor lift,
bucket truck
•
Round 4.5mm to 6.5mm Cat6A PoE (Power over Ethernet) cable (RJ45 fittings attached)
•
Smartphone/device for Inseego Mobile™ app with Bluetooth® enabled
•
SIM card (4FF Nano)
•
Phillips-head screwdriver
•
M6 4mm hex driver
•
Drill
•
14mm socket wrench/driver
• Ground wire #10 AWG
•
Cat6A shielded outdoor or direct burial cable
•
Bishop tape (roofing sealant)
•
Silicone sealant (wall penetrations)
•
Flexible cable clips, nail clips, or vinyl siding clips
Your FW2000e package includes: FW2000e device, PoE injector, and SIM tool.
NOTE:
Mount installation packages are ordered and shipped separately.
*
Flooded cable is recommended to prevent water intrusion.
5G OUTDOOR CPE FW2000e INSTALLATION GUIDE
*
5